▰ F Bomb Garage LLCCart 0

COMPONENT INDEX / 10 DISTINCT CONSTRUCTIONS

Shop all components

Compare the connection and the measurement — not a fitment promise.

Reset

10 components found

Towing straps5 constructions / dimensions in mm

Bolt-Plate Tow Strap — 50 mm polyester webbing; 4 mm zinc-plated steel eye plate
FB-01 / Towing straps

Bolt-Plate Tow Strap

$29.00

Measure the mounting bolt and clear access to the tow point; hardware is not supplied.

webbing 250 x 50 mm; plate 70 x 45 mm; single 13 mm round hole

Double-Loop Tow Extension — 50 mm polyester webbing; sewn reinforced loops at both ends
FB-02 / Towing straps

Double-Loop Tow Extension

$24.00

Extends an accessible attachment path only after the entire vehicle attachment system is checked.

overall 450 x 50 mm; clear loop openings 80 mm

Ring-End Tow Strap — 50 mm polyester webbing; welded steel D-ring
FB-03 / Towing straps

Ring-End Tow Strap

$34.00

Choose when the mating connector shape accepts a closed D-ring; no connector included.

overall 320 x 50 mm; ring internal 45 x 35 mm

Sleeved Soft-Eye Tow Strap — 50 mm polyester webbing; removable woven abrasion sleeve
FB-04 / Towing straps

Sleeved Soft-Eye Tow Strap

$32.00

Sleeve covers the contact zone but does not make a sharp edge acceptable.

overall 500 x 50 mm; sleeve 180 mm; eye openings 70 mm

Clevis-Tab Tow Strap — 50 mm polyester webbing; paired 4 mm steel clevis tabs
FB-05 / Towing straps

Clevis-Tab Tow Strap

$38.00

For a measured mating clevis connection; pin and bolt selection need separate fitment review.

overall 280 x 50 mm; tab internal gap 12 mm; aligned holes 13 mm

Seat mounts5 constructions / dimensions in mm

Slotted Angle Mount Pair — Black-finished metal; single-flange L-bracket pair
FB-06 / Seat mounts

Slotted Angle Mount Pair

$89.00

Mounting component pair for a fitter-reviewed seat mounting arrangement. Confirm slot positions, base attachment points, clearances and hardware before order acceptance; no seat, runners or fasteners included.

Mounting dimensions confirmed before order acceptance

T-Base Slotted Mount Pair — Silver-finished metal; upright slotted plates on two-sided T bases
FB-07 / Seat mounts

T-Base Slotted Mount Pair

$79.00

Mounting component pair for a fitter-reviewed seat mounting arrangement requiring a two-sided base footprint. Confirm slot positions, base attachment points, clearances and hardware before order acceptance; no seat, runners or fasteners included.

Mounting dimensions confirmed before order acceptance

Flat Base Adapter Plate — 5 mm black powder-coated steel; central relief cut-out
FB-08 / Seat mounts

Flat Base Adapter Plate

$95.00

Base adapter only: compare floor points, rail layout and tunnel clearance; not vehicle-specific.

400 x 360 x 5 mm; four 12 x 40 mm perimeter slots; centre opening 220 x 160 mm

Crossbar Mount Pair — 5 mm zinc-plated steel; flat offset crossbars
FB-09 / Seat mounts

Crossbar Mount Pair

$69.00

Crossbars bridge measured mounting points; they do not include runners or floor anchors.

each 420 x 55 x 18 mm; two 12 x 45 mm slots per bar

Offset Pedestal Mount Pair — 4 mm powder-coated steel; folded box-section risers
FB-10 / Seat mounts

Offset Pedestal Mount Pair

$109.00

Raised mounting decks require headroom and belt-path checks as part of a complete installation.

each 300 x 70 x 60 mm; top slots 9 x 25 mm; base slots 12 x 30 mm